About Us
Who we are?
Ampere Engineering is a precision-focused electronics and fabrication company serving motorcycles, ATVs, UTVs/side-by-sides, watercraft, and performance automotive platforms.
We specialize in high-end electronics diagnostics, component-level PCB repair, and professional electrical integration built for real-world durability. Our work includes board-level troubleshooting, micro-soldering, circuit repair, ECU and control module evaluation, and clean, serviceable wiring systems designed for long-term reliability under vibration, heat, and environmental exposure.
From accessory power distribution and lighting installs to full electrical system upgrades, every project is executed using engineering-grade diagnostics, proper circuit protection, structured routing, and professional workmanship practices.
No guesswork. No shortcuts.
Beyond electronics, we design and fabricate purpose-built solutions. We offer custom 3D printed mounts, brackets, and enclosures to create clean, integrated installations for accessories, modules, and power management systems.
Our custom design division, MotoAtelier™, expands our capabilities into engineered visual and material transformation. Through MotoGraphix™, MotoSkins™, MotoLivery™, and MotoSignature™, we provide professional wraps, protective films, race liveries, and precision engraving — built with the same discipline and durability standards as our electrical work.
Ampere Engineering exists at the intersection of performance, precision, and craftsmanship.
Whether you need advanced electronics repair, custom electrical integration, structural fabrication, or engineered visual customization, we deliver professional solutions designed to last.
Engineering-level electrical work for motorcycles, powersports, and automotive.
Professional motorcycle, powersports, and automotive electrical services built around precision, reliability, and clean execution.
Ampere Engineering provides:
- Advanced electrical diagnostics and fault tracing
- Component-level PCB and module repair
- Charging system and battery system troubleshooting
- ECU, CAN bus, and sensor diagnostics
- Accessory integration (lighting, GPS, audio, power blocks)
- Performance electrical upgrades
Using professional-grade test equipment and proper installation practices, we deliver clean, serviceable wiring solutionsthat perform in high-vibration, high-heat, real-world environments.
Designed for riders and builders who want it done correctly the first time.
Custom 3D Printed Mounts
Custom 3D Printed Mounts & Enclosures
Purpose-built motorcycle, ATV, UTV, and automotive mounts engineered for durability and precision fitment.
We design and produce:
- GPS and tracker mounts
- ECU and module enclosures
- Fuse block and power distribution housings
- Weather-resistant electronics enclosures
- Custom brackets and structural mounts
- Vibration-isolated mounting solutions
Each design is tailored to your exact application and built using high-strength materials suitable for off-road vibration, weather exposure, and heat cycles.
The Custom Design Division of Ampere Engineering
MotoAtelier™ is the artistic and fabrication arm of Ampere Engineering LLC — created for riders and builders who demand precision, durability, and identity in every detail.
We specialize in engineered customization for motorcycles, ATVs, UTVs, watercraft, and performance vehicles. From full visual transformations to subtle engraved signatures, every project blends design, material science, and real-world performance requirements.
Our divisions include:
MotoGraphix™ – Custom graphics and visual identity systems
MotoSkins™ – Premium wraps and protective films
MotoLivery™ – Professional race and fleet branding
MotoSignature™ – Precision engraving and permanent detailing
Unlike traditional print shops, MotoAtelier™ approaches customization with engineering discipline. Materials are selected for vibration resistance, UV exposure, heat cycling, and environmental durability. Installation is executed with precision. Every detail is intentional.
This is not off-the-shelf styling.
This is engineered expression.
Custom Motorcycle, ATV & Automotive Wire Harness Design and Assembly
Precision-built custom wire harnesses for motorcycles, ATVs, UTVs, and performance vehicles.
We specialize in:
- Full OEM replacement harness builds
- Custom performance wiring harnesses
- CAN bus & signal harness design
- High-current power distribution harnesses
- Connector replacement & re-pinning
- Weather-sealed harness assemblies
- Electrical rework & harness repair
Built using automotive-grade wire, sealed connectors, proper strain relief, and IPC/WHMA-A-620 best practices, every harness is designed for durability under vibration, heat, and moisture.
Clean routing. Reliable connections. Professional finish.
ATV, UTV & Side-by-Side Electrical Upgrades
Built for the trail, desert, mud, and mountain.
Ampere Engineering delivers off-road electrical systems and custom wiring solutions for ATVs, UTVs, and side-by-sides, including:
- Light bar & auxiliary lighting integration
- Winch wiring & power upgrades
- GPS & tracking system installs
- Custom switch panels & power distribution
- Waterproof wiring harness builds
- Charging system upgrades
- Accessory fuse blocks & relay systems
Off-road vehicles demand electrical systems that survive dust, water, vibration, heat, and shock. We design installations that are clean, protected, and built for long-term durability.
Whether you ride dunes, rocks, woods, or trails — your electrical system should be as tough as your machine.
EMC/EMI Pre-Compliance Testing
Ready to catch problems before you pay for official lab time.
Ampere Engineering provides home pre-screen emissions testing for small builders and early prototypes, helping you identify noisy frequency bands and likely coupling paths up to 26.5 GHz, including:
- Baseline emissions scan to flag obvious problem areas
- Standard pre-scan across multiple operating modes
- Identify dominant noise sources, harmonics, and clock related spikes
- Cable and port coupling checks to find hidden antennas
- Mitigation direction: grounding, shielding, filtering, routing, enclosure seams
- Quick verify scans after changes to confirm improvement
- Pre-screen notes you can use before sending to an accredited lab
This is a practical pre-check service designed to produce accurate, repeatable results with controlled setups and documented configurations. It is not certification, but it can save time and money by reducing failed lab runs.
E-Bike Repair and Service
Built to keep you riding when the electronics do not.
Ampere Engineering troubleshoots and repairs e-bike electrical issues like no power, no charge, cutouts, and error codes. We focus on clean fixes that restore reliability and prevent repeat failures, including:
- No power or random shutdown diagnostics
- Charging issues: charger, port, and power path faults
- Intermittent cutouts under load and vibration related faults
- Controller, display, and wiring fault isolation
- Sensor issues: throttle, PAS, speed, brake cutoff problems
- Connector and harness repair with strain relief and weather protection
- Accessory installs: lights, USB power, trackers, clean wiring integration
E-bikes live in heat, water, vibration, and shock. We build repairs that are protected, serviceable, and dependable, so your bike works like it should—day after day.
About the Owner
Quality Work at Every Stage—Because It Matters to You.
Welcome—I'm Brandon, the owner and founder of Ampere Engineering LLC, based in Spring Hill, Kansas. I built this business for people who want electronics and electrical work done the right way: clear troubleshooting, clean workmanship, and solutions that last. Not the quick-and-dirty, it-will-do type of work.
My background started early—at about age 5 I was around computers every day in my family’s repair and sales shops. That turned into an apprenticeship through high school, followed by a Military career and work as an EMS Medic, where reliability, safety, and calm problem-solving mattered. After that, I opened and operated a consumer electronics repair shop in Arkansas for 10 years, handling everything from “won’t power on” devices to board-level failures. Combined with over 16 years of graphics, web, and design work, I bring the perfect blend of knowledge and skills to tackle any challenge.
Today, Ampere Engineering blends hands-on repair experience with RF engineering expertise—including Bluetoothand wireless integration, EMC/EMI troubleshooting, and IPC-certified electronics workmanship. I also hold an BS Electronic Engineering degree and 3M certification, and I’m passionate about motorcycles—so our motorcycle, powersports, and e-bike services are built around clean installs, proper protection, and long-term reliability.
What customers can expect
- RF engineering and wireless experience (including Bluetooth and signal troubleshooting)
- IPC-certified electronics repair and careful board-level work
- Real-world experience from running a repair shop for 10 years
- A Veteran-Owned small business that values straight answers and quality work
- A mission focused on customer-owned electronics, including MotoGarage™—no subscriptions, no lock-in
If you’re not sure what you need, reach out. Describe the issue, share a photo if you can, and I’ll tell you the best next step—whether that’s repair, install, or a better alternative.
Expert Electrical Engineering Services
Component Level PCB Repair
We perform precision micro soldering and component level PCB repair to restore electronics that others replace. From cracked pads and lifted traces to connector damage and power faults, we troubleshoot at circuit level and repair with workmanship practices aligned with IPC guidance (e.g., IPC-7711/7721, IPC-A-610, J-STD-001).
Standards Based Quality and Workmanship
Ampere Engineering emphasizes quality, traceability, and safe workmanship. We reference ISO/IEC/IPC standards where applicable — not as marketing fluff, but as the baseline for documentation discipline, electronics rework practices, and consistent service outcomes.
Board Level Diagnostics and Failure Analysis
Not guessing — diagnosing. We isolate faults with data driven testing, inspection, and measurement to identify root cause before any repair work begins. Our documentation and workflow follow disciplined quality principles inspired by ISO 9001 style process control so results are repeatable and verifiable.
ECU and Control Module Repair
We support ECU and control module repair and rework where practical, including connector damage, failed regulators, corrosion recovery, and circuit reconditioning. Repairs prioritize electrical integrity, thermal reliability, and proper rework practices aligned with IPC standards so the fix lasts.
Motorcycle, ATV, UTV, and Automotive Electrical Installs
Professional electrical installs for bikes and vehicles — accessories, lighting, power distribution, and clean integration that avoids hack wiring. We build for durability with correct protection, routing, strain relief, and serviceability, using engineering discipline rather than “shop shortcut” installs.
Custom Wiring, Harness Builds, and Clean Integration
Custom wiring solutions for new builds, repairs, and upgrades — including harness building, connectors, and re-termination when OEM wiring is compromised. We focus on reliability, noise control, and long term maintainability, with workmanship expectations aligned to IPC/IEC best practices (as applicable).